Ohlins STX Pro Shock – HD 050 For Harley Touring 2014-2026

Description

Öhlins STX Pro Shocks for Motorcycle Suspension Performance

Upgrade your motorcycle’s suspension with Öhlins STX Pro shocks, designed to deliver adjustable damping, dependable handling, and improved ride control for street riding. Featuring a 36 mm piston, hard-anodized machined aluminum components, and a high-pressure nitrogen gas charge, this suspension kit is built for riders seeking greater control over their motorcycle’s rear suspension setup.

The STX Pro design includes adjustable rebound and compression damping, adjustable spring preload, and a length adjustment range of up to half an inch. Standard and Heavy Duty (S2) spring options are available, helping riders choose a configuration suited to their motorcycle and load requirements. The listed application also specifies compatibility with a Tour-Pak; verify exact motorcycle fitment before ordering.

Öhlins STX Pro Shocks with Adjustable Rebound and Compression

These Öhlins STX Pro shocks provide adjustable rebound and compression damping to help fine-tune suspension behavior. Compression damping influences how the shock responds as it compresses, while rebound damping controls how it extends afterward.

Adjusting these settings appropriately can help riders tailor suspension response to road conditions, load, and riding preferences. Follow the manufacturer’s adjustment instructions and confirm the correct settings for your motorcycle. Actual handling and comfort depend on fitment, spring selection, rider weight, and setup.

36 mm Piston and Monotube Suspension Design

The 36 mm piston is a key specification of the STX Pro shock design. The system is engineered to provide controlled damping for street use, helping the suspension respond to changing road surfaces and riding inputs. Its construction combines performance-focused components with adjustable settings for a more tailored suspension setup.

Before purchasing, check the manufacturer’s product information for the exact shock design, mounting requirements, and motorcycle application. Correct fitment is essential for safe suspension operation.

Adjustable Length for a More Precise Setup

The listed length adjustment is up to 1/2 inch. This feature provides a degree of flexibility when setting up the suspension, subject to the manufacturer’s instructions and the application’s approved adjustment range.

The specified extended length is 12.00 inches. Confirm the measurement method and compatibility with your motorcycle before ordering, as shock length can affect suspension geometry, ride height, and handling characteristics.

Standard and Heavy Duty S2 Spring Options

Multiple spring rates are available, including Standard and Heavy Duty (S2) options. Selecting the correct spring is important for achieving suitable suspension sag and supporting the intended rider, passenger, and luggage load.

Consider your usual riding conditions and total load when selecting a spring configuration. Do not assume that one spring rate is suitable for every motorcycle or rider. Verify the recommended spring option with the manufacturer or seller.

Adjustable Preload with a Billet Tool

The adjustable preload system allows the spring’s initial compression to be set according to the motorcycle’s setup requirements. A billet tool is specified for preload adjustment. Correct preload can help establish appropriate suspension sag and maintain useful suspension travel when configured for the rider and load.

Nitrogen-Charged Design and Durable Components

These shocks use a high-pressure nitrogen gas charge as part of their damping system. Their construction also features hard-anodized, CNC-machined aluminum components designed for durability and precision.

The low-friction shaft and seal-head design supports smooth suspension movement. The shocks are described as fully serviceable and repairable, allowing maintenance according to the manufacturer’s procedures. Use qualified suspension service when disassembly, recharging, or internal repairs are required.

Tour-Pak Compatibility for Street Riding

The supplied product information states that the shocks fit with a Tour-Pak. Because luggage systems, mounting configurations, and motorcycle models vary, confirm the exact application and any load limitations before installation. Compatibility should be verified for your motorcycle’s year, make, model, and existing suspension setup.

Öhlins STX Pro Shocks Specifications

• Product Name: Shock
• Model: STX Pro
• Riding Style: Street
• Duty: Standard
• Color/Finish: Black
• Material: Hard-anodized machined aluminum
• Piston Diameter: 36 mm
• Damping Adjustments: Rebound and compression
• Preload: Adjustable with billet tool
• Length Adjustment: Up to 1/2 inch
• Extended Length: 12.00 inches
• Gas Charge: High-pressure nitrogen
• Spring Options: Standard and Heavy Duty (S2)
• Units: Kit
• Tour-Pak Compatibility: Listed; verify exact fitment
• Serviceability: Fully serviceable and repairable

Verify Fitment Before Ordering

Confirm the exact motorcycle year, make, model, shock mounting dimensions, and required spring option before purchasing. Verify the 12.00-inch extended length, half-inch adjustment range, and Tour-Pak compatibility against the manufacturer’s fitment information. Professional installation is recommended when required to ensure safe suspension setup.